Full size loft bed with slide – There are many bunk beds available for sale in a city, as well as designs for do it yourself kits bunk bed. However, most loft beds are for twin-size mattresses. If your kids need a larger bed put together a full-size bunk bed is a fairly simple DIY project. Although it is possible to just change the dimensions of a twin-size kit. You may need to make some adjustments to accommodate for extra weight.
Full size loft bed with slide, fit a square with two 75-inch beams and two 35 inch beams. Attach them so that they are standing on the edge (not flat on the floor) with two screws in each mounting point. Drive screws through the plate of the short beams, the ends of the long beams. Then, place screws 1/2 inch from the top and bottom of the beams.
Making full size loft bed with slide, drill two holes at each corner, with the help of a drill diameter of your bolts. Place the first hole one inch from the inside edge of the long boom, an inch from the top of the short code. Place the second hole 3/4 inch below the first hole. All holes must be drilled in the short steel beams. Lay a sheet of plywood flat on top of the square, aligned edges. Attach it to the square with a wood screw in each corner. Then, secure the plywood with two screws along each short side and three along each long side. Space screws evenly.